F2 UMTS/3G

UMTS Status Information - Firmware v2.2.3.0 (developer version)

UMTS Settings - Firmware v2.2.3.0 (developer version)

Here are the instructions on how to use a 3G/3.5G modem with the La Fonera 2.0. For list of tested umts modems see the 3G/3.5 compatibility list.

Instructions for Fonera

Please connect the UMTS Modem.
- If you use a express card and a adapter, please plug them together first and connect it to the usb port.
Click on the UMTS/3G Dashboard Icon and enter the provider settings.
Your UMTS Modem will now dial in.
The Status Information appear.

The Fonera 2.0 only supports Usb 2.0 HIGH speed (480Mbit/s); most 3G modems are Usb 2.0 FULL speed (11mBit). Please connect a Usb Hub (4port) to your Fonera 2.0; this will also allow you to connect more than 1 usb device
Try to reboot the fonera 2 with the 3G stick plugged in
Did you configure your 3G provider/username/password/apn correctly?
The USB Led only goes on when a Storage Device is connected

acquire SSH access; this only works in "developer mode" -> check applications to activate developer mode -> the background turns GREEN.
Perform a reboot ; wait untill the power led returns to green : SSH key is generated
Perform a reboot once more : SSH server will now be running with these ssh keys.
acquire a SSH client (eg : Putty)
connect with this client via MyPlace or LAN of the Fonera 2.0 (ssh : 192.168.10.1)
user : root
password : <whatever you chose>
logread
- this should show if it detected something plugged in
cat /proc/bus/usb/devices
- This shows what it found connected on the usb bus
Create ticket on http://trac.fonosfera.org/fon-ng