Fonera 2.0n Specifications
From FON Wiki Beta
Contents |
Technical Specifications
- Model Name: FON2303
- Dimensions: 30 mm x 157 mm x 127 mm (excluding antenna)
- Power: 12VDC, 1A Switching Power Adapter
- Temperature: 32~104°F (0 ~ 40°C)
- Humidity: 10-90% (NonCondensing)
- USB Port: USB 2.0/1.1
- Ethernet Ports: 1 Ethernet WAN port (10/100Mbps) for internet + 4 Ethernet LAN port (10/100Mbps) for computer connections and other devices (network printer, storage, etc.)
- Antennas: 2 3dBi Dipole Fixed Antennas (2T2R MIMO Technology)
- Authentication: WEP 64bit/128 bit, WPA, WPA2, WPA mixed
- Encryption: TKIP, AES, Mixed
- Network Standard Support: IEEE 802.11g/b and 802.11n (up to 150 Mbps)
- SSIDs: One public (named FON_FREE_INTERNET by default) non-encrypted and one private (named MyPlace by default) encrypted with WPA-PSK
- Certification: FCC, CE
- Warranty: 2 Years
Note: You cannot use the Fontenna or other antennas with the Fonera 2.0n. Antennas are not detachable.
Performance Table
LED Status description
| Symbol | Name/Color | Activity | Description |
|---|---|---|---|
| Power | ON | Fonera receiving power |
|
| Power | Blinking | Fonera unable to send Heart Beat |
| USB | OFF | No USB storage device attached |
|
| USB | Solid | USB storage device connected (safe to remove) |
|
| USB | Blinking | USB storage mounted (do not remove) |
| WAN | OFF | No cable connected to WAN port or router/modem off |
|
| WAN | ON | Cable connected on WAN port |
|
| WAN | Strobing | Traffic on WAN port |
| Wireless | OFF | No wireless signal broadcasted (Wireless switch is 'off') |
|
| Wireless | Strobing | Traffic on Wireless signals |
|
| Wireless | Blinking | Fonero logged on public signal |
| LAN | OFF | No cable connected to LAN port or router/modem off |
|
| LAN | ON | Cable connected on LAN port |
|
| LAN | Strobing | Traffic on LAN port |
Switch and Buttons
- Wireless Switch: When set to OFF
- The Fonera 2.0 will not broadcast any Wireless signal anymore. Consequently no members of the FON community will be able to connect to your Fonera anymore, and you will have to use an Ethernet cable to access your Fonera.
- Since you are not sharing your Internet access with the FON community, your roaming privileges will be suspended. i.e. You will not be able to connect to FON Spots for free anymore.
- Reset Button: While the Fonera is switched ON
- One click on the button activate WPS (only available since firmware 2.3.5.0).
- Pressing the button from 2 to 5 seconds reboots the Fonera.
- Pressing this button from 10 to 30 seconds restore the default settings of the Fonera.
- Reset Button: While the Fonera is switched OFF, holding this button while the Fonera boots trigger it's firmware restore mode.
 |
Language: |
English • Español • Français • Nederlands |
