Webcam-Logitech
From FON Wiki Beta
Contents |
Webcam Compatibility
Logitech
Logitech Qcam V-UAX16 Pro 5000
dmesg
usb 1-1.1: new high speed USB device using ehci_hcd and address 6 usb 1-1.1: configuration #1 chosen from 1 choice
- after reboot
usbcore: registered new interface driver ov51x ov51x_jpeg: 1.5.7 : ov51x USB Camera Driver fuse init (API version 7.9) usbcore: registered new interface driver quickcam uvcvideo: Unknown symbol input_allocate_device uvcvideo: Unknown symbol input_unregister_device uvcvideo: Unknown symbol input_free_device uvcvideo: Unknown symbol input_register_device uvcvideo: Unknown symbol input_event
cat /proc/bus/usb/devices
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=046d ProdID=08c5 Rev= 0.05 S: SerialNumber=D2273EA3 C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=ff(vend.) Sub=03 Prot=00 A: FirstIf#= 2 IfCount= 2 Cls=01(audio) Sub=02 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=01 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 16 Ivl=16ms I:* If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=02 Prot=00 Driver=(none) I: If#= 1 Alt= 1 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=00 Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 192 Ivl=125us I: If#= 1 Alt= 2 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=00 Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 384 Ivl=125us I: If#= 1 Alt= 3 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=00 Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 512 Ivl=125us I: If#= 1 Alt= 4 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=00 Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 640 Ivl=125us I: If#= 1 Alt= 5 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=00 Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 800 Ivl=125us I: If#= 1 Alt= 6 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=00 Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS= 944 Ivl=125us I: If#= 1 Alt= 7 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=00 Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS=1280 Ivl=125us I: If#= 1 Alt= 8 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=00 Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS=1600 Ivl=125us I: If#= 1 Alt= 9 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=00 Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS=1984 Ivl=125us I: If#= 1 Alt=10 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=00 Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS=2688 Ivl=125us I: If#= 1 Alt=11 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=00 Driver=(none) E: Ad=81(I) Atr=01(Isoc) MxPS=3060 Ivl=125us I:* If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none) I:* If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=(none) I: If#= 3 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none) E: Ad=86(I) Atr=05(Isoc) MxPS= 16 Ivl=1ms I: If#= 3 Alt= 2 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none) E: Ad=86(I) Atr=05(Isoc) MxPS= 32 Ivl=1ms I: If#= 3 Alt= 3 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none) E: Ad=86(I) Atr=05(Isoc) MxPS= 48 Ivl=1ms
Quickcam Web
opkg install kmod-video-quickcam_2.6.26.2+0.6.6-fonera-1_mips.ipk
- Kernel support for Logitech's QuickCam Express webcam and other webcams with similar chipsets.
dmesg
quickcam: QuickCam USB camera found (driver version QuickCam USB 0.6.6 $Date: 2006/11/04 08:38:14 $) quickcam: Kernel:2.6.26.2 bus:1 class:FF subclass:FF vendor:6D04 product:5008 quickcam: Sensor VV6410 detected quickcam: Registered device: /dev/video0 usb 1-1.3: USB disconnect, address 10 usb 1-1.3: new full speed USB device using ehci_hcd and address 12 usb 1-1.3: configuration #1 chosen from 1 choice
cat /proc/bus/usb/devices
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 11 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1 P: Vendor=046d ProdID=0850 Rev= 1.00 S: Product=Camera C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=quickcam E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=16ms I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=quickcam E: Ad=81(I) Atr=01(Isoc) MxPS=1023 Ivl=1ms E: Ad=82(I) Atr=03(Int.) MxPS= 1 Ivl=16ms I:* If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none) I:* If#= 2 Alt= 0 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 100 Ivl=1ms
motion
[0] Motion 3.2.10.1 Started [0] Thread 1 is from /etc/motion.conf [1] Thread 1 started [0] motion-httpd/3.2.10.1 running, accepting connections [0] motion-httpd: waiting for data on port TCP 8080 [1] Failed to open video device /dev/video0: Broken pipe
